Automobile Casting Parts Are Often Used In Lives

Date:14-09-2017

The die-casting process was originally developed for the automotive industry. Although we are in a global recession, the car casting market is growing, especially in foreign countries. In fact, the Ministry of Foreign Trade in 2010 increased by nearly 20%. Die casting is very similar to mold casting, but die casting is injected at higher pressures. Therefore, the automotive die casting and Automobile Casting Parts more uniform, much better surface finish, greatly improve the accuracy of the size. In fact, the accuracy of up to 99.8%. Through the die-casting process, after the creation of parts, usually do not need further machine participation.

Die casting has such a large surface finish, no other manufacturing process can be achieved. In addition, the method makes the surface finish aesthetically pleasing, and can not be achieved by other manufacturing methods. Can be painted and electroplated, if not molded thermoplastics, you can look better. Die castings are not only superior to thermoplastics because of their aesthetics, but also because the engineering structure can only be achieved by metal rather than by plastic.

The die-casting process is very popular in the manufacture of household products and the business architecture. However, the most common application is still the automotive industry. There are many parts of the car created by die casting. In fact, listing all these would be almost impossible. However, we look at the common automotive casting parts.

Almost every part of the engine is made by die casting. For example, the cylinder head on the engine is made by die casting. Moreover, all the components on the gas engine are almost completely disengaged from the die castings. Typically, the alloys used in these processes are aluminum. The stator is also usually made by die casting. The stator has a lot of change. This is why the use of die castings is a good way, because it allows each time to create the highest precision mechanical parts of the same size.

The stent is also created by the die casting process. The bracket is used for electrical parts of the motor. In addition, stepper motors also use die-cast brackets, which are usually created according to customer specifications. There are many other components in the automotive industry that are made by die casting. For example, the radiator and the automatic fork are made by die casting. In fact, the automotive casting parts are almost made by die-casting.