"IF YOU CAN DRAW IT, WE CAN MAKE IT!"TECHNOLOGY FOR THE 21ST CENTURY
Excavator Bucket Teeth - A Brief Introduction
Excavator Bucket Teeth are attachments for excavators and other digging equipment to increase their ability to penetrate soil and rock. They mount to the leading edge of the tool and act as grippers when the operator maneuvers the tool into the soil to dig out foundations, ditches and other areas. This component of an excavator can wear down quickly, and replacement teeth are available from many manufacturers of earth movers, excavators and similar equipment. They are often generic in shape and design, allowing operators to use teeth from different manufacturers if necessary.
Excavator bucket teeth are one of the most important parts of ground-engaging tools. The bucket teeth on this type of construction equipment allows it to dig deeply into the ground, to pull up the vast amounts of earth most machines of this type are required to move. Without the excavator bucket teeth, equipment would have no digging mechanism and would be useless to the construction industry.
Each excavator bucket tooth is held in place with a pin-and-socket design. They are firmly fixed in place, so that they do not wobble or bend while the excavator is in operation. Over time, the teeth tend to wear down, especially when they are used in hard, coarse materials. They also can become loose in the sockets and might start to shift in use. This might be a sign that the teeth need to be replaced.
Used excavator bucket teeth are available through suppliers of heavy equipment and accessories. They might have some wear, and in some cases, they are refurbished and repainted to resist rust before the company packages them for resale. Otherwise, new replacements are readily available. Technicians also can repair existing teeth, in some instances. It might be possible to resharpen bladed teeth, for instance, so that they will reacquire a cutting edge and be more useful in excavations.
It's vital that excavator bucket teeth are strong, so reinforced steel is usually the best option when manufacturing this type of equipment part. The ground can often be hard and digging tools come into contact with rocks, stones, tree branches and all kinds of other things that can break bucket teeth if they are too weak.
Because of the problems associated with the high-frequency of changing the worn and blunt teeth on earth moving machinery, it became necessary to provide a solution. Therefore, looking for a reliable manufacturer or supplier to provide your excavator bucket teeth is the premise to ensure your normal operation.