"IF YOU CAN DRAW IT, WE CAN MAKE IT!"TECHNOLOGY FOR THE 21ST CENTURY
Improve Bucket Teeth’s Mechanical Property
The mechanical properties of a material are those properties that involve a reaction to an applied load. The mechanical properties of metals determine the range of usefulness of a material and establish the service life that can be expected, the materials which makes bucket teeth require a high level of wear resistance. Mechanical properties are also used to help classify and identify the materials to be used. The most common properties considered are strength, ductility, hardness, impact resistance, and fracture toughness.
Most structural materials are anisotropic, such as the materials that are used to make bucket teeth, which means that their material properties vary with orientation. The variation in properties can be due to directionality in the microstructure from forming or cold working operation, the controlled alignment of fiber reinforcement, and a variety of other causes.
Mechanical properties are generally specific to product form such as sheet, plate, extrusion, casting, forging, etc. Additionally, it is common to see mechanical property listed by the directional grain structure of the material. In products such as sheet and plate, the rolling direction is called the longitudinal direction, the width of the product is called the transverse direction, and the thickness is called the short transverse direction.
The mechanical properties of a material are not constants and often change as a function of temperature, rate of loading, and other conditions. For example, temperatures below room temperature generally cause an increase in strength properties of metallic alloys; while ductility, fracture toughness, and elongation usually decrease. Temperatures above room temperature usually cause a decrease in the strength properties of metallic alloys. Ductility may increase or decrease with increasing temperature depending on the same variables.
It should also be noted that there is often significant variability in the values obtained when measuring mechanical properties. Seemingly identical test specimen from the same lot of material will often produce considerable different results. Therefore, multiple tests are commonly conducted to determine mechanical properties. Also, a range of values are sometimes reported in order to show variability.
Being Bucket Teeth manufacturer that has a robust engineering team to determine how to improve the mechanical properties of the materials which are used to make ground engaging tools, we take care every request or questions from our customers, help them to choose the right bucket teeth.