"IF YOU CAN DRAW IT, WE CAN MAKE IT!"TECHNOLOGY FOR THE 21ST CENTURY
Which Bucket Teeth are Suitable for Clay
Let’s all take a moment to appreciate clay. Clay is used in paper, plastics and rubber. Clay is used in the bricks that build our houses and in the drains and sewage we rely on. Clay purifies water, refines petroleum, and the list goes on. Then, is there anything that clay cannot do? Well, clay doesn’t remove itself from the ground easily. Hard clay is difficult to penetrate. And when it’s wet, you run the risk of sinking your machinery. If that is your problem, luckily, this time we will show you how to choose appropriate bucket teeth for the excavator to work on clay.
Generally, we recommend rock chisel bucket teeth for penetrating clay surfaces. Because this kind of bucket teeth can easily break through the initial crusty and tough clay surface and then has the length and width to strip out the clay.
The configuration of the rock chisel allows for minimal wear. The point and bevel at the front is self-sharpening and the tooth is reversible. This increases wear time without needing to change your digging angle.
This penetration rock chisel bucket tooth also has the added benefit of having a wider tip which helps with lumping the clay in the bucket. Ultimately getting the job done quicker.
Besides, there is no need to switch out bucket teeth if moving from hard to wet clay applications when using a rock chisel tooth. These teeth are capable of penetrating the hard clay, while also digging wet lump clay.
On the other hand, the most common answer among the mining and construction industry is twin-tiger bucket teeth.
Twin tiger bucket teeth are perfect for improved penetration in hard clay applications and will assist in the initial piercing of the top layer of the clay surface.
Keep in mind that twin tigers have less wear material penetrating the ground, so they tend to wear down fast and lose penetration quality. This is a key reason why we recommend the rock chisel tooth in this application.
In addition, standard wide bucket teeth are ideal for working in wet clay, as an alternative to the rock chisel. The extra width at the tip assists in stripping out the clay and throwing lump clay in to the bucket.